Features

• Sealed with pure Dow Corning SP4577 Silicone Dielectric - Ensuring the best waterproof connection

• Industry leading Dielectric Strength and Volume Resistivity

• Single Step connection - pre-twisting of wires is not necessary

• Makes a secure waterproof connection the first time every time

 

Specifications

• Maximum Voltage: 600v

• Dielectric Strength > 450v/mil @ 50 mil gap

• Volume Resistivity: 2.17×1015 Ω-cm

 

Installation

ALWAYS TURN OFF POWER BEFORE INSTALLING OR REMOVING CONNECTORS.
ONLY INSTALL PER LOCAL AND NATIONAL CODES.

NOT FOR USE IN CONTINUOUS SUBMERSION APPLICATIONS.

1. Strip wires: 1/2" for wires larger than 16ga, 7/16" for 16ga and smaller

2. Hold wires* together with copper tips even. Straighten frayed or bent wires and strands. Pre-twisting wires is not necessary.

3. Firmly push wires evenly into connector and twist clockwise until secure. Do not over tighten. Do not reuse connector.

​

* See Spec Sheet for wire combinations and capacity.

 

Part Numbers