Twist N Splice Wire Connectors
Features
-
Sealed with pure Dow Corning SP4577 Silicone Dielectric - Ensuring the best waterproof connection
-
Industry leading Dielectric Strength and Volume Resistivity
-
Single Step connection - pre-twisting of wires is not necessary
-
Makes a secure waterproof connection the first time every time
Specifications
-
Maximum Voltage: 600v
-
Dielectric Strength > 450v/mil @ 50 mil gap
-
Volume Resistivity: 2.17×1015 Ω-cm
Installation
ALWAYS TURN OFF POWER BEFORE INSTALLING OR REMOVING CONNECTORS.
ONLY INSTALL PER LOCAL AND NATIONAL CODES.
NOT FOR USE IN CONTINUOUS SUBMERSION APPLICATIONS.
-
Strip wires: 1/2" for wires larger than 16ga, 7/16" for 16ga and smaller
-
Hold wires* together with copper tips even. Straighten frayed or bent wires and strands. Pre-twisting wires is not necessary.
-
Firmly push wires evenly into connector and twist clockwise until secure. Do not over tighten. Do not reuse connector.
​
* See Spec Sheet for wire combinations and capacity.
Part Numbers
Images
Click on an image to enlarge